ctys-VMW-Configuration

October, 2010

.

VMW - Basics for Operations

The ctys-VMW plugin defines a meta-layer for an abstract interface, which is in current version based on the final commandline call of the supported products. The ctys-VMW plugin supports a subset of the products native command line options mapped to the ctys call options, the remaining are bypassed as native options. Future versions are going to provide an abstract encapsulation layer by a common ctys-wrapper script and in addition utilization of the vendor provided management interfaces for batch-mode installation and operations.

The call structure fits into the common structure of ctys but for the current version the ctys-wrapper script is not yet supported for the VMW subsystem.

Interfaces for Access Points


The VMW subsystem supports the standard configuration files created by the vendor utilities. Thus any existing installation with any already present VMs and vmx-files could be used without required adaptation. These could be either used by dynamic addressing, dynamic search, or by unmodified scan into the inventory database. The creation of new VMs is foreseen by the standandard procedures as defined by the vendor and supported by the products.

REMARK:
The current version requires the access to the VMX-configuration-files, thus these have to be either registered in the UnifiedSessionsManager inventory database, or provided by the call sub-options for scan-start base:, or by explicit addressing id:. For newer versions e.g. of VMware-Server-2x(TM) in case of usage of subdirectories for the actual storage of the virtual devices, the configuration and management information is probably still stored in the root of the configured storage. This should be post-merged manual with the virtual device into a unique shared directory comprisingly representing the VM.

The lack of the standard vmx-files is the missing of offline information about the GuestOS. The UnifiedSessionsManager provides for basically two options for the coallocated storage of additional extended GuestOS information.

The ctys-configuration-file is defined by convention to be stored within the directory of the virtual machine, coallocated with the vmx-file and named with the same prefix as the vmx-file: <vmx-file-prefix>.ctys and the containing directory ..../<vmx-file-prefix>. Even though this probably could varied, this has to be avaoided due to probable unanounced remove of the required features. The file could be created and added manually by the user with the same following optional "ctys-conf" vmx-file modifications and by the previous naming convention.

Alternatively the keywords could be stored within the vmx-file, due to the key-prefixes defined to begin with a valid vmx-comment character these are protected for unintended evaluation by the hypervisor. The provided example may suffice the most required offline information for the user-management of the VM, including the automated generation of a cache database for the network inventory.


  #@#MAGICID-VMW

  #@#VMSTATE="ACTIVE"
  #@#SERNO="20080415051600"
  #@#VERSION="01.01.001"
  ####MAC0 is provided by the eth0 of vmx-file!
  #@#IP0="192.168.1.235"
  #@#DIST="CentOS"
  #@#DISTREL="5"
  #@#OS="Linux"
  #@#OSREL="2.6"
  #@#CATEGORY="VM"


The current version is supported by the interactive installer ctys-createConfVM(1) which creates an appropriate addon-configuration file. For examples of CentOS installation as GuestOS refer to ctys-uc-CentOS(7). Once VMW is setup, the boot of the VM could be performed by the CREATE action of ctys. Basic Use-Cases for application are contained within the document ctys-uc-VMW(7).


Supported HOST-OSs

The VMW plugin is supported on all released runtime environments of the UnifiedSessionsManager where the products are available.


Supported GuestOSs

The native GuestOS support is the same as for the PMs and HOSTs plugins.


Supported Architectures

The whole set of available CPUs by Products is supported :

  x86, AMD64, x86_64


Supported Interfaces

Current version supports the commandline interfaces of the products.


Supported VM Management Interfaces

The current version supports for basic management facilities by a vendor provided tools. These comprise mainly the creation of runtime entities and the cancellation of running instances a.k.a sessions. Library functions for vendor provided coding interfaces are due to the lack of actual requiremtn not utilized yet. The interface for the commandline based tools varies between the producty and versions. The additional requirements such as a valid account with appropriate permissions including the actual call interface may vary, e.g. for vmrun between Server-1.0.10 and Server-2.0.2. The following tools are utilized for now as required:


Network Interconnection

NIC-bonding
The Installation of VMware is quite forward. Only some minor pitfalls occur for specific configurations with NIC-bonding. When a bonding device is utilized on Linux the mode=6 is not supported, which is the ARP-negotiation of client and server machines. The success of the support could be easily checked when using a guest system and calling ping. The effect is the lost of about the half of the ping-answers. This is somewhat a pity, because the mode=6 seems to be the fastest mode which even does not require support of intermediate network equipment. Any other mode seems to work properly.


Installation of Components

The provided examples are based - if not stated else - on CentOS-5.4, but may be applicable for any other distribution similar.

Server-1.0.10
The installation of VMware-Server(TM)-1.0.10 on CentOS-5.4 depends on the used kernel. The description is verified to be applicable to linux-2.6.29.

  1. Download and install rpm of product from VMware(TM) Inc. e.g. VMware-server-1.0.10-203137.i386.rpm
  2. Install new kernel, here linux-2.6.29.
  3. Install init_mm patch for kernel and configure build-parameters. Set kernel-parameter for "Kernel-Hacking" activate "EXPORT UNUSED SYMBOLS" The patch could be downloaded from www.i4p.com.
  4. Build kernel.
  5. Install patches for "/usr/lib/vmware/modules/sources". The patch could be downloaded from www.i4p.com.
  6. Reboot.
  7. Configure vmware: vmware-config.pl
Server-2.0.2
The installation of VMware-Server(TM)-2.0.2 on CentOS-5.4 depends on the used kernel.

  1. Common
    • Download and install rpm of product from VMware(TM) Inc. e.g. VMware-server-2.0.2-203138.x86_64.rpm
    • For CentOS-5.4 - install glibc-patch and edit "/usr/sbin/vmware-hostd" script. The patch could be downloaded from www.i4p.com.

    • Athentication with Kerberos

      For the following distributions the procedures are verified. But as far as known only the credentials/password are fetched form Kerberos. Currently - eventually due to knowledge-lack - missing the full SSO.

      The only file required be modified is '/etc/pam.d/vmware-authd'.

      • debian-5.0.0 - Kerberos Insert setting from '/etc/pam.d/sudo' before the standard contents.
          @include common-auth
          @include common-account
        

      • CentOS-5.4 - Kerberos Insert the following before the standard contents.
          auth      include system-auth
          account   include system-auth
        

    • Reboot.
    • After creation of the first additional user within the VMware GUI, the counter/index for the next user has to be once incremented manually within the file

      '/etc/vmware/hostd/authorization.xml'.

      Else the creation of additional users fail with the error message expressing unavailability of the database.

  2. Standard kernel-2.6.18
    • Configure vmware: vmware-config.pl

  3. New kernel-2.6.32.6 -Install, configure, and build the new kernel, here linux-2.6.32.6.
    • Install patches for "/usr/lib/vmware/modules/sources". The patch could be downloaded from www.i4p.com.
    • Configure vmware: vmware-config.pl

  4. Standalone Console
    • Extract plugin for standalone console from Server installation and install this at "/opt/vmware/vmware-wmrc-x64". The patch could be downloaded from www.i4p.com.
    • Install "xdg-utils".
Player-1.0.5
Install the rpm package VMware-player-1.0.5-56455.i386.rpm for the standard kernel linux-2.6.18-164.el5.

Player-2.5.3
Install the rpm package VMware-player-1.0.5-56455.i386.rpm for the standard kernel linux-2.6.18-164.el5.

Player-3.0.1
Install the bundle-package VMware-Player-3.0.1-227600.x86_64.bundle for the standard kernel linux-2.6.18-164.el5.

Workstation-6.5.3
Install the bundle-package VMware-Workstation-6.5.3-185404.x86_64.bundle for the standard kernel linux-2.6.18-164.el5 and execute vmware-config.pl.

Workstation-7.0.1
Install the bundle-package VMware-Workstation-Full-7.0.1-227600.x86_64.bundle* for the standard kernel linux-2.6.18-164.el5.
Standalone Console VMWRC


Install Procedures

General Remarks
The most of the installation is performed with PXE if possible. Therefore the PXELINUX is switched to version 3.6.2 and a menu system for the management of the whole test-environment is setup. When difficulties occur due to specific network requirement, the CD-mount on ISO files option is used, which is almost in any case experienced to be quite safe for VMware products.

Installation and Maintenance by Product Console
For initial creation or basic maintenance the console of the specific product has to be started. The following options are available.

Product Version Available Console
Server 1.x Proprietary
Server 2.x Browser, VMWRC
Workstation x Proprietary, VNC
Player - -
Overview of product specific consoles


The console could be started e.g. by usage of the X11 plugin. This is the case for the 2.x versions of the Server-Products.

  
    ctys -t x11 \
         -a create=l:vmware,cmd:firefox%http:://127.0.0.1::8222 \
         delphi
  


The double column masks this character as a native to be bypassed, else it would be interpreted as a seperator of subarguments. The non-SSL port is required in some cases, where the other is not operable.

Any X11 program could be executed, e.g. the proprietary console by:

  
    ctys -t x11 \
         -a create=l:vmware,cmd:vmware \
         delphi
  


  1. Start remote console by browser. Here as non-encrypted.
      
        ctys -t x11 \
             -a create=l:vmware,cmd:firefox%http:://127.0.0.1::8222 \
             delphi
      
    

    Here the non-encrypted local port is utilized, whereas the encrypted port is the default.

    It is recommended to use a the "Product Compatibility" for "Virtual Hardware" as "4" or "6". This assures the presence of a vmx-file.

  2. Create a VM by 'Create Virtual Machine' command entry and perform the required steps. The following steps assume an ISO image as the install media.

  3. Start the VM by calling:
      
        ctys -t vmw \
             -a create=l:debian-5.0.0,console:vmwrc,user:acue,\
                       p:/mntn/vmpool/vmpool01/vmw/templates/debian-5.0.0 \
             delphi
      
    

    This enters the native install procedure of the debian distribution.

  4. Start installation by choosen install media.
PXE-Boot
The folowing steps are applied to an installation by PXE. This anyhow requires the proper setup of DHCP, TFTP, and one of HTTP/FTP/NFS. For some OSs a so calld kickstart file could be used to automate the whole procedure.

For Linux and BSD refer to SYSLINUX and ETHERBOOT.
  1. Create a VM by native means of a VMware product, but do not start it yet. When the base machine is created, close the VM.

    The common convention within ctys is, that the following items are all literally the same.
  2. Edit the VMX file manually and apply following changes and addons:
  3. The default behaviour is described as "generatedAddress", which could change and is somewhat challenging to be continuously maintained for PXE/DHCP. Therefore it should be changed to "static". The resulting entries depend on the actual product, but the essential entries seem to be common as for following example:
  4. When the cache database is already populated by values from /etc/dhcpd.conf or a manually created database similar to /etc/ethers, the utility ctys-macmap could be used for management of address-mappings.

  5. Add ctys-meta information as required for ENUMERATE. Additional values might be applied to the following example. The values are not recognized by VMware, thus has to be kept synchronous by the user. The main intention is to get cacheable information for off-line guests to be utilized by and therefore by ENUMERATE and therefore by ctys-vhost

    
      #@#MAGICID-VMW
    
      #@#VMSTATE="ACTIVE"
      #@#SERNO="20080415051600"
      #@#VERSION="01.01.001"
      ####MAC0 is provided by the eth0 of vmx-file!
      #@#IP0="192.168.1.235"
      #@#DIST="CentOS"
      #@#DISTREL="5"
      #@#OS="Linux"
      #@#OSREL="2.6"
      #@#CATEGORY="VM"
    
    

  6. Close the file within the editor and open it again within the VMware frontend.
  7. From now on the following steps could be already proceeded either by native call of "vmware", or by usage of the UnifiedSessionsManager, which has some advances for monitoring and LIST of current active sessions.

    The following example illustrates the call, when for a new machine the <machine-adress> is not yet registered within the cacheDB(ctys-vdbgen)

      
      ctys -t vmw \
           -a create=p:$HOME/vmware/tst-ctys/tst116/tst116.vmx,reuse \
           -c off \
           -C off \
           host1
      
    

ISO-Image and DHCP
The install procedure for usage of an ISO-Image is almos the same as for PXE, just a few formal differences apply.
Remote Console for 2.x-versions - vmware-vmrc
The remote console plugin of the Server-2.0 versions could be started standalone too, thus integrates seamless as a graphic terminal into ctys.

The compressed plugin for various architectures is stored in the directory:
  /usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/webapps/ui/plugin
This directory contains the files:
These can be uncompressed with unzip, the plugins directory is the only subdirectory required, which contains the executable vmware-vmrc. This requires the containing directory as base for relative search for shared libaries, thus should be the call directory for simplicity.

In ctys it is in current pre-configuration expected this directory to be renamed and located as one of the following directories. These are searched in the given order until first match.

  1. ${MYADDONSPATH}/vmware-rc-x64
    The advance is here, that the whole package is distributed together with ctys when using ctys-distribute with a file copy mode.
  2. ${HOME}/vmware/vmware-rc-x64
  3. /opt/vmware/vmware-rc-x64
  4. /usr/bin
  5. /usr/local/bin
  6. /usr/share/vmware-rc
  7. /usr/share/vmware-rc-x64
  8. /usr/share/vmware-rc-x86
  9. /opt/bin
  10. /opt/vmware/vmware-rc

When calling ctys with the console type VMWRC now it should be considered whether the password will be provided by commandline or inserted into the dialogue mask when omitting. An alternative is the Single-Sign-On configuration.

The resulting call could be :

  
  ctys -t vmw \
    -a create=l:tst502,reuse,user:root%tst,console:vmwrc \
    -c local root@lab02
  


Supported/Tested Install-Mechanisms
The current version relies on the provided intstall mechanisms of the product supplier, and pre-requires an installed system.


Installation of GuestOS

LT-a href="../man7/ctys-uc-CentOS.html" >CentOS-5LT-/b>
Installation is in general quite straight-forward. Here performed by PXE on a i386 machine with one CPU.

Debian-4.0_r3
Installation is quite straight-forward, once the required additional netboot-image is downloaded and in place. The differences and additions to the predefined environment are:
Debian-5.0.0
Refer to the example in chapter "Installation and Maintenance by Product Console".

Fedora 8
Installation is quite straight-forward and very similar to CentOS.

MS-Windows-NT-4.0-S
Installed from ISO image.

MS-Windows-2000-WS
Installed from ISO image.

OpenBSD
Installation is quite straight-forward, just the two-level boot has to be considered.

SuSE
Installation is quite straight-forward.


Installed Systems


OS name Inst-VM Media
CentOS-5.0 tst117 Server-1.x, 2.x PXE,ISO
CentOS-5.1 tst112 Server-1.0.4 PXE,ISO
CentOS-5.2 tstxxx Server-1.0.4 PXE,ISO
CentOS-5.3 tstxxx Server-1.0.4 PXE,ISO
CentOS-5.4 tst131 Server-1.0.10, 2.0.2 PXE,ISO
CentOS-5.5 x Server-2.0.2 PXE,ISO
Debian-4.0r3 tst106 Server-1.0.4 PXE,ISO
Debian-5.0.0 tst200 Server-1.0.10 PXE,ISO
Debian-5.0.0-amd64 debian-5.0.0 Server-2.0.2 ISO
Fedora 8 tst103 Server-1.0.4 PXE
Fedora 10 tstxxx Server-1.0.10 ISO
Fedora 12 tst201 Server-1.0.10 ISO
FreeBSD-7.1 tst208 Server-2.0.2 ISO
FreeBSD-8.0 tst209 Server-2.0.2 ISO
Gentoo-2009 (tst231) Server-2.0.2 ISO
Mandriva-2010-free tst227 Server-2.0.2 ISO
Mandriva-2010 tst203 Server-2.0.2 ISO
OpenBSD-[2-4] tstXYZ WS5/6,Server-1.0.[1-5] PXE,ISO
OpenBSD-4.0 tst109 Server-1.0.4 PXE
OpenBSD-4.2 tstxxx Server-1.0.4 PXE
OpenBSD-4.3 tst155 Server-1.0.4 PXE
OpenBSD-4.6 tst207 Server-1.0.4 PXE
ScientifiLinux-5.4.1 tst204 Server-1.0.10 PXE,ISO
SuSE-9.3 tst003 WS6,Server-1.0.[345] PXE,ISO
OpenSuSE-10.3 tst116 WS6,Server-1.0.[345] PXE,ISO
OpenSuSE-11.2 tst205 WS6,Server-1.0.[345] PXE,ISO
Solaris 10 tst115 WS6 ISO
OpenSolaris 2009.6 tst242 Server-2.0.2 ISO
Ubuntu-6.06.1-D tst128 Server-1.0.4 ISO
Ubuntu-6.06.1-S tst120 Server-1.0.4 PXE
Ubuntu-7.10-S tst005 Server-1.0.4 PXE
Ubuntu-8.04-D tst132 Server-1.0.4 ISO
Ubuntu-8.04-S tst133 Server-1.0.4 PXE
Ubuntu-9.10-D tst133 Server-2.0.2 ISO
Ubuntu-10.10-D tstXYZ Server-2.0.2 ISO
MS-Windows-2000WS tstXYZ WS4/5/6,Server-1.0.[1-5] PXE,ISO
MS-Windows-2000S tstXYZ WS4/5/6,Server-1.0.[1-5] PXE,ISO
MS-Windows-2003S x Server-2.0.2 ISO
MS-Windows-XP tstXYZ WS4/5/6,Server-1.0.10 PXE,ISO
MS-Windows-NT-4.0S tstXYZ WS4/5/6,Server-1.0.[1-5] PXE,ISO
Overview of Installed-VMs




SEE ALSO

ctys(1) , ctys-createConfVM(1) , ctys-VMW(1) , ctys-uc-VMW(7) , ctys-plugins(1) , ctys-vhost(1) , vmware(1)

ctys-uc-CentOS(7)

PXE-SYSLINUX-PXELINUX-ISOLINUX: <http://syslinux.zytor.com>,

PXE-ROM-Images-Etherboot: <http://www.etherboot.org>




AUTHOR

Written and maintained by Arno-Can Uestuensoez:

Maintenance: <<acue_sf1 (a) sourceforge net>>
Homepage: <https://arnocan.wordpress.com>
Sourceforge.net: <http://sourceforge.net/projects/ctys>
Project moved from Berlios.de to OSDN.net: <https://osdn.net/projects/ctys>
Commercial: <https://arnocan.wordpress.com>




COPYRIGHT

Copyright (C) 2008, 2009, 2010 Ingenieurbuero Arno-Can Uestuensoez

For BASE package following licenses apply,

This document is part of the DOC package,

For additional information refer to enclosed Releasenotes and License files.